INSTA-STIK Roofing Adhesive 750ml

INSTA-STIK Roofing Insulation Adhesive 750ml 

£9.95 Excl. VAT

Overview

INSTA-STIK Roofing Adhesive 750ml

INSTA-STIK Roofing Adhesive 750ml is a specially formulated polyurethane foam adhesive for the purpose of adhering rigid insulation boards to flat roofs.

This product is ideal for bonding the insulation directly to the existing substrate or our self adhesive vapour barrier. The unique formulation provides the optimum “open time” allowing for sufficient adhesive to be applied to the substrate prior to placing of the boards and provides a superior bond to resist wind forces.

INSTA-STIK is applied to the roof substrate in beads or ribbons, the roof insulation board is then placed on to the beads straight away or within 10 minutes and will be firmly adhered typically within 20-30 minutes

Cannister Size: 750ml

Coverage: Bonds up to 14m2 of roof insulation board (based on 19-25 mm beads at 300mm centres

Selling: This product is sold per canister

Installation

Download the PDF files for full comprehensive guides on using EPDM.

EPDM Installation Guide

ClassicBond Guide

 

FAQ

[accordions] [accordion title=”1. Are the EPDM Membranes Guaranteed?” visible=”yes”]The 20 year EPDM guarantee is available only to all certified installers that have attended our training courses. [/accordion] [accordion title=”2. Can EPDM sheets be joined?“]Yes. all of our EPDM membranes can be joined where the roof size is bigger than the largest membrane size or where it would be easier to install the membrane in some smaller sections. [/accordion][accordion title=”3. Can I install EPDM under a shallow pitched tile roof?” visible=”yes”]Yes. You can install EPDM under a pitched tiled roof. This may even be necessary on some shallow pitched roofs to prevent any leaks. [/accordion][accordion title=”4. Can I walk on my new roof?” visible=”yes”]To a certain extent, yes you can. EPDM is designed to take some LIGHT foot traffic during installation and during occasional cleaning/ maintenance. If you do require more use than this (for a balcony) then there are some additional materials that can be laid on top of your EPDM for more durable solutions. [/accordion][accordion title=”5. Do I need any special tools?” visible=”yes”]Typically, you’ll need a standard 9″ roller set, mini roller and brush for applying adhesives and primers. A Seam Roller is a useful tool for tapes and joins. The RESITRIX system will require a heat gun for joins. [/accordion][accordion title=”6. Does it have to be dry for EPDM to be laid?” visible=”yes”]Yes. EPDM Membranes require the substrate to be dry prior to the installation process. This is to ensure adhesive & primers can effectively bond the rubber to the roof deck. EPDM products will not adhere to any wet or damp surfaces. Trapped moisture may vaporize and affect the membranes performance.[/accordion][accordion title=”7. I have incorrect roof tiles for the roof pitch.” visible=”yes”]If the pitch of your roof is too shallow for roof tiles then installing an EPDM rubber membrane would be an excellent solution to this problem.[/accordion][accordion title=”8. How thick is the membrane?” visible=”yes”]ClassicBond and ShedCover = 1.2mm or 1.5mm DuoPly = 2.54mmRESITRIX = 2.5mm ElastaThane = 1.2mm in one coat[/accordion][accordion title=”9. Is ClassicBond EPDM BBA Certified?” visible=”yes”]Yes. ClassicBond membrane holds the British Board of Agrément certificate. No. 11/4853. In addition, it holds fire ratings for each of the thicknesses available.[/accordion][accordion title=”10. Is ClassicBond membrane available in any different colours?” visible=”yes”]No. ClassicBond EPDM membrane is only available in one colour, a slate grey colour.[/accordion][accordion title=”11. Is there a right way up when installing ClassicBond EPDM membranes?” visible=”yes”]Classicbond EPDM membranes are identical on both sides. This means there is no right or wrong side when you are installing it. However, you may sometimes find some small amount of printed writing on one side of the Rubber Membrane. This may be wise to keep this side down.[/accordion][accordion title=”12.What is the difference between ClassicBond and Firestone EPDM?” visible=”yes”]ClassicBond® EPDM is CE marked with a nominal thickness of 1.2mm. In contrast to the thinner 1.1mm of Firestone RubberCover as defined by EN 13956.[/accordion][accordion title=”13.What is the biggest EPDM sized sheet I can buy?” visible=”yes”]All sheets can be joined where the roof size is bigger than the maximum sheet size: ClassicBond & Shedcover 1.2mm – 15.25m x 30.5m (50ft x 100ft) ClassicBond & Shedcover 1.5mm – 15.25m x 15.25m (50ft x 50ft) DuoPly 2.54mm – 1.52m x 12.20m (5ft x 40ft) RESITRIX 2.50mm – 1M x 10M (3ft 4″ x 32ft 10″).[/accordion][accordion title=”14. How long has rubber been used for roofing?” visible=”yes”]the first commercial rubber roof was installed in 1965 in the US by Carlisle Syntec. It is now over 50 years old and still going very strong.[/accordion][accordion title=”15.Why are there blisters and/ or bubbles on my EPDM rubber roof?” visible=”yes”]Whilst bubbles and/ or blisters on a once-piece EPDM roof can seem unsightly, they won’t cause the rubber membrane to fail. The bubbles of trapped air and/ or moisture can be caused by a variety of issues which are all avoidable if the roof design is correct and the membrane was correctly installed.[/accordion] [/accordions]

Documentation

 

Fire Rating BS476

Fire Rating EN13501

ClassicBond BBA certificate

Technical Data

ClassicBond Brochure