Flat Rubber Roof Kits

Flat Roof Kits are for extensions where the back edge is adjoining a house wall and the front edge has a gutter

 

Please select correct size kit from the drop down menu

£199.86£683.99 Excl. VAT

Clear
This field can't be Empty

Overview

Flat-EPDM-rubber-roof-kits

This kind of Flat Rubber Roof Kit is straightforward to install, has a great look and the life expectancy is up to 50 years. EPDM rubber membranes are UV, Ozone and Infrared stable so this will not crack, blister or peel. This kit includes the 1.2mm One-Piece EPDM rubber membrane, adhesives and edging trims.

Colour: Lead / Slate Grey

Used For: EPDM rubber roof for extension, garage, or porch where the roof is joined to a wall 

Included in Kit:

• -1.2mm thick ClassicBond EPDM Membrane (Size as per roof kit chosen) 

• -Water Based Adhesive  to adhere membrane to roof deck

• -Contact adhesive to adhere perimeter of roof deck to Membrane

• -Sure EdgeGutter for front edge

• -Sure Edge Kerb for both side edges

• -Sure Edge Corner for both front corners

• -Wall trim to act as flashing against your house wall

• -External corner atches & primer for both back corners where roof meets house wall

• -Tools requires for DIY Installation(Rollers, Scissors & Paint Brush)

• -All Pins and Clips to go with Trims

• -Installation Guide

IF NEEDED WE CAN TAILOR THE KIT TO SUIT YOUR ROOF – CALL 0800 121 4997 TO DISCUSS

The Membrane size is the same as mentioned in kit size. Therefore your roof size will need to be smaller to allow for edge overlaps. e.g. 6metre x 3metre roof kit will fit a roof that is no larger than 5.7metres x 2.7metres.

Description

This kind of Flat Rubber Roof Kit is straightforward to install, has a great look and the life expectancy is up to 50 years. EPDM rubber membranes are UV, Ozone and Infrared stable so this will not crack, blister or peel. This kit includes the 1.2mm One-Piece EPDM rubber membrane, adhesives and edging trims.

Colour: Lead / Slate Grey

Used For: EPDM rubber roof for extension, garage, or porch where the roof is joined to a wall 

Included in Kit:

• -1.2mm thick ClassicBond EPDM Membrane (Size as per roof kit chosen) 

• -Water Based Adhesive  to adhere membrane to roof deck

• -Contact adhesive to adhere perimeter of roof deck to Membrane

• -Sure EdgeGutter for front edge

• -Sure Edge Kerb for both side edges

• -Sure Edge Corner for both front corners

• -Wall trim to act as flashing against your house wall

• -External corner atches & primer for both back corners where roof meets house wall

• -Tools requires for DIY Installation(Rollers, Scissors & Paint Brush)

• -All Pins and Clips to go with Trims

• -Installation Guide

IF NEEDED WE CAN TAILOR THE KIT TO SUIT YOUR ROOF – CALL 0800 313 4486 TO DISCUSS

The Membrane size is the same as mentioned in kit size. Therefore your roof size will need to be smaller to allow for edge overlaps. e.g. 6metre x 3metre roof kit will fit a roof that is no larger than 5.7metres x 2.7metres.

Installation

Download the PDF files for full comprehensive guides on using EPDM.

EPDM Installation Guide

 

FAQ

[accordions] [accordion title=”1. Are the EPDM Membranes Guaranteed?” visible=”yes”]The 20 year EPDM guarantee is available only to all certified installers that have attended our training courses. [/accordion] [accordion title=”2. Can EPDM sheets be joined?“]Yes. all of our EPDM membranes can be joined where the roof size is bigger than the largest membrane size or where it would be easier to install the membrane in some smaller sections. [/accordion][accordion title=”3. Can I install EPDM under a shallow pitched tile roof?” visible=”yes”]Yes. You can install EPDM under a pitched tiled roof. This may even be necessary on some shallow pitched roofs to prevent any leaks. [/accordion][accordion title=”4. Can I walk on my new roof?” visible=”yes”]To a certain extent, yes you can. EPDM is designed to take some LIGHT foot traffic during installation and during occasional cleaning/ maintenance. If you do require more use than this (for a balcony) then there are some additional materials that can be laid on top of your EPDM for more durable solutions. [/accordion][accordion title=”5. Do I need any special tools?” visible=”yes”]Typically, you’ll need a standard 9″ roller set, mini roller and brush for applying adhesives and primers. A Seam Roller is a useful tool for tapes and joins. The RESITRIX system will require a heat gun for joins. [/accordion][accordion title=”6. Does it have to be dry for EPDM to be laid?” visible=”yes”]Yes. EPDM Membranes require the substrate to be dry prior to the installation process. This is to ensure adhesive & primers can effectively bond the rubber to the roof deck. EPDM products will not adhere to any wet or damp surfaces. Trapped moisture may vaporize and affect the membranes performance.[/accordion][accordion title=”7. I have incorrect roof tiles for the roof pitch.” visible=”yes”]If the pitch of your roof is too shallow for roof tiles then installing an EPDM rubber membrane would be an excellent solution to this problem.[/accordion][accordion title=”8. How thick is the membrane?” visible=”yes”]ClassicBond and ShedCover = 1.2mm or 1.5mm DuoPly = 2.54mmRESITRIX = 2.5mm ElastaThane = 1.2mm in one coat[/accordion][accordion title=”9. Is ClassicBond EPDM BBA Certified?” visible=”yes”]Yes. ClassicBond membrane holds the British Board of Agrément certificate. No. 11/4853. In addition, it holds fire ratings for each of the thicknesses available.[/accordion][accordion title=”10. Is ClassicBond membrane available in any different colours?” visible=”yes”]No. ClassicBond EPDM membrane is only available in one colour, a slate grey colour.[/accordion][accordion title=”11. Is there a right way up when installing ClassicBond EPDM membranes?” visible=”yes”]Classicbond EPDM membranes are identical on both sides. This means there is no right or wrong side when you are installing it. However, you may sometimes find some small amount of printed writing on one side of the Rubber Membrane. This may be wise to keep this side down.[/accordion][accordion title=”12.What is the difference between ClassicBond and Firestone EPDM?” visible=”yes”]ClassicBond® EPDM is CE marked with a nominal thickness of 1.2mm. In contrast to the thinner 1.1mm of Firestone RubberCover as defined by EN 13956.[/accordion][accordion title=”13.What is the biggest EPDM sized sheet I can buy?” visible=”yes”]All sheets can be joined where the roof size is bigger than the maximum sheet size: ClassicBond & Shedcover 1.2mm – 15.25m x 30.5m (50ft x 100ft) ClassicBond & Shedcover 1.5mm – 15.25m x 15.25m (50ft x 50ft) DuoPly 2.54mm – 1.52m x 12.20m (5ft x 40ft) RESITRIX 2.50mm – 1M x 10M (3ft 4″ x 32ft 10″).[/accordion][accordion title=”14. How long has rubber been used for roofing?” visible=”yes”]the first commercial rubber roof was installed in 1965 in the US by Carlisle Syntec. It is now over 50 years old and still going very strong.[/accordion][accordion title=”15.Why are there blisters and/ or bubbles on my EPDM rubber roof?” visible=”yes”]Whilst bubbles and/ or blisters on a once-piece EPDM roof can seem unsightly, they won’t cause the rubber membrane to fail. The bubbles of trapped air and/ or moisture can be caused by a variety of issues which are all avoidable if the roof design is correct and the membrane was correctly installed.[/accordion] [/accordions]